To participate in the TRAINING DAYS it’s necessary to be a member of AIS/ISA Italy
The participation is free of charge for the member The registration fee is AIS € 55.00 – ISA Italy section € 130.00

For registration and payment contact us at: summit@aisisa.it  02 54123816

The courses will be held via Microsoft’s TEAMS platform

20th September

ENVIRONMENTAL MARKETS AND CHARGE ON ADDED EMISSIONS (IMEA) – Agime Gerbeti

Energy markets, even with characteristic historical and economic paths according to the energy carrier, are markets subject to regulatory schemes aimed at taking care of interests of public nature. Environmental markets are structured for emission reduction targets (included in the wide spectrum of environmental protection and public health) through the negotiation of titles/certificates representing, directly or indirectly, negative externalities of energy supplies or industrial processes.

The European emissions trading system has been the most ambitious management of negative externalities related to GHG set up at the international level. The EU now considers that the costs of ecological industrial transition could limit the ability of European industries to compete in the globalised market with industries not subject to similar limits and costs. The EU intends to adopt a carbon adjustment tax at the border, to limit the phenomenon of reallocation and compensate for environmental costs.

The focus is set on the charge on emissions mechanism (Imposta sulle emissioni aggiunte – IMEA), which is one of the three proposals the European Economic and Social Committee suggested to the European Commission for further investigation in view of the current competitive asymmetry now recognized by the EU Commission itself. The charge on emissions would value industrial emissions directly within the VAT and use the blockchain to track the emissive supply chain of products.

 

STANDARDIZATION OF DISTRIBUTION FACILITIES: RECENT DEVELOPMENTS – Giuseppe Dell’Olio

The course is focused on International standards and certification involving distribution grids, smart grids, distributed energy resources. In order to keep a connection with “real life”, a number of case studies are described.

 

TECHNICAL REGULATION AND EAC CERTIFICATION OF EQUIPMENT IN RUSSIA AND THE EAEU
Natalya Anishchenko – Irina Kuryngina (certification expert) – WR Certification

The topic of conformity assessment of products and equipment according to the technical regulations of the EAEU is deep and complex, like the EAC certification process itself.

It is important to meet specific requirements while importing your products to the EAEU and Russia, in particular. The most requirements to the equipment to be imported are regulated by technical regulations. The technical regulations of the EAEU form the basis of the current conformity assessment system in the Eurasian Economic Union.

Industrial products and equipment manufactured abroad must be certified as safe and of high quality before they enter the markets of Russia or other EAEU countries. To ensure a smooth EAC certification process, you need to know the law and the sequence of the individual steps in the process. Methods of equipment certification in Russia and European countries are different and include the different stages, authorities and procedures.

We will provide an insight into the specifics of the certification process in Russia and the EAEU as well as essential industrial technical regulations of the Eurasian Economic Union TR CU and TR EAEU. In the second, practical part of the training course, you will be able to analyze your specific cases with support of an accredited certification expert.

THE ADDED VALUE OF OUR VOICE IN THE DIGITAL ERA – Milena Origgi – Inborn Voice

More and more companies and professionals are aware of the importance of voice, or Soft Communication Skills. In this event we will discover why, in order to improve one’s social, business and presentation skills, it is not enough to focus only on the purely technical aspect of the speaking voice, but it is essential to address the much more valuable empathic-emotional aspect. We will see why the true added value of a communication based on emotions and the Inborn Voice method is able to bring advantages in all areas of our social and working life, and thus shape every success. We will focus on the modern era of communication. If you’re curious to find out why “How you say it” matters more than the words you choose to say it, this event is for you.

21th September

SAFETY INSTRUMENTED SYSTEMS (SIS) – Alessandro Brunelli

The course explains the first the general requirements of the IEC 61508, and then outlines the requirements of the functional safety of the process industry IEC 61511, which describes
the requirements necessary to ensure the functional safety of industrial plants operating in the chemical, petrochemical, energy and others.
The course then examines in completion the procedures, methodologies and examples of application necessary to ensure the functional safety in the process industry, through Electrical, Electronic and Programmable Electronic Systems (E/E/PES).

 

ISA CYBERSECURITY TRAINING COURSE

for further details please contact info@isaeurope.org

https://isaeurope.opleidingsportaal.nl/training/details?categorieId=5235&categorie=ISA%2fIEC+62443-1+Cyber+Security+IC32&soortcode=IC32&opleidingssoortId=54762

Using the ISA/IEC 62443 Standards to Secure Your Control Systems (IC32E)The move to using open standards such as Ethernet, TCP/IP, and web technologies in supervisory control and data acquisition (SCADA) and process control networks has begun to expose these systems to the same cyberattacks that have wreaked so much havoc on corporate information systems. With the introduction of the new UK HSE Operational Guidance OG-0086, the need to understand the fundamentals of control system security has never been more important.This course provides a detailed look at how the ISA/IEC62443 standards can be used to protect your critical control systems. It also explores the procedural and technical differences between the security for traditional IT environments and those solutions appropriate for SCADA or plant floor environments.This course is part theISA/IEC 62443 Cybersecurity Certificate Program.

EXCLUSIVE: ISA CYBER SECURITY TRAININGS
with ISA CERTIFICATE

Using the ISA/IEC 62443 Standards to Secure Your Control Systems (IC32E)The move to using open standards such as Ethernet, TCP/IP, and web technologies in supervisory control and data acquisition (SCADA) and process control networks has begun to expose these systems to the same cyberattacks that have wreaked so much havoc on corporate information systems. With the introduction of the new UK HSE Operational Guidance OG-0086, the need to understand the fundamentals of control system security has never been more important.This course provides a detailed look at how the ISA/IEC62443 standards can be used to protect your critical control systems. It also explores the procedural and technical differences between the security for traditional IT environments and those solutions appropriate for SCADA or plant floor environments.This course is part theISA/IEC 62443 Cybersecurity Certificate Program.

 

 

Course on SAFETY INSTRUMENTED SYSTEMS – SIS –

30th March 2021

English version for our members – for any detail information contact our office – ais@aisisa.it

The course explains the first the general requirements of the IEC 61508, and then outlines the requirements of the functional safety of the process industry IEC 61511, which describes
the requirements necessary to ensure the functional safety of industrial plants operating in the chemical, petrochemical, energy and others.
The course then examines in completion the procedures, methodologies and examples of application necessary to ensure the functional safety in the process industry, through Electrical, Electronic and Programmable Electronic Systems (E/E/PES).

To download the poster click here

 

EXCLUSIVE: ISA CYBER SECURITY TRAININGS
with ISA CERTIFICATE

Using the ISA/IEC 62443 Standards to Secure Your Control Systems (IC32E)The move to using open standards such as Ethernet, TCP/IP, and web technologies in supervisory control and data acquisition (SCADA) and process control networks has begun to expose these systems to the same cyberattacks that have wreaked so much havoc on corporate information systems. With the introduction of the new UK HSE Operational Guidance OG-0086, the need to understand the fundamentals of control system security has never been more important.This course provides a detailed look at how the ISA/IEC62443 standards can be used to protect your critical control systems. It also explores the procedural and technical differences between the security for traditional IT environments and those solutions appropriate for SCADA or plant floor environments.This course is part theISA/IEC 62443 Cybersecurity Certificate Program.